Basler BE1-CDS220, Instruction Manual

Page: 413 / 476

BE1-CDS220 BESTCOMS Software 14-23
Figure 14-29. Virtual Switches Screen, 43-143-243-343 Tab
The virtual breaker control switch provides manual control of a circuit breaker or switch without using
physical switches and/or interposing relays. The mode logic setting for Virtual Switch 43 can be made by
clicking on the BESTlogic button. With your custom logic selected, select the mode logic by using the
Mode pull-down menu. The 143, 243, and 343 switches can be changed in the same manner.
One virtual breaker control switch is available with the BE1-CDS220 (Figure 14-29). The mode logic
setting for Virtual Breaker Control Switch 101 can be made by clicking on the BESTlogic button. With your
custom logic selected, select the mode logic by using the Mode pull-down menu. Trip outputs include
Trip, Close, and Slip Contact.
443-543-643-743
These virtual switches have the same functionality as the 43 virtual switch explained above.
BESTlogic
Pull down the Screens menu and select BESTlogic or click on the BESTlogic icon, which is
shown at the right margin of this paragraph. This screen has three folder tabs and the first tab is
Logic Select.
Logic Select
This screen (Figure 14-30) allows you to select one of the preprogrammed logic schemes and copy that
scheme to active logic. Click on the logic to be copied to the active logic and a dialog box appears
requiring that you okay the replacement of all settings. Execute the OK and then type in the custom
name.