Basler BE1-CDS220, Instruction Manual, Page: 50 / 476

3-2 Input And Output Functions BE1-CDS220
Table 3-1. Power System Measurement Function Settings
Setting Range Increment
Unit of
Measure
Default
Nominal Frequency 50, 60 N/a Hertz 60
Phase Rotation ABC, ACB N/a N/a ABC
CT Ratio (ct ratio), Input 1 1-50,000 1 Turns 1
CT Connection (ct con), Input 1 WYE, DAB, DAC N/a N/a WYE
Transf. Connection (tx con), Input 1
N/a, WYE, DAB,
DAC
N/a N/a N/a
Ground Source (gnd src), Input 1
(optional)
0=No, 1=Yes N/a N/a 0
CT Ratio (ct ratio), Input 2 1-50,000 1 Turns 1
CT Connection (ct con), Input 2 WYE, DAB, DAC N/a N/a WYE
Transf. Connection (tx con), Input 2
N/a, WYE, DAB,
DAC
N/a N/a N/a
Ground Source (gnd src), Input 2
(optional)
0=No, 1=Yes N/a N/a 0
CT Ratio, Optional Independent Ground
Input
1-50,000 1 Turns 1
Power System Setup
To enter Power System settings, select General Operation from the Screens pull-down menu. Then select
the Power System tab. Refer to Figure 3-1.
Figure 3-1. General Operation Screen, Power System Tab