Basler BE1-CDS220, Instruction Manual

Page: 408 / 476

14-18 BESTCOMS Software BE1-CDS220
Figure 14-22. Reporting and Alarms Screen, Demands Tab
Breaker Monitoring
This screen, Figure 14-23, contains settings for Breaker Duty Monitoring and Breaker Duty Alarms.
Click in the field for 100% Duty Maximum and set the value. Logic settings for the Block Accumulation
Logic can be made by clicking on the Logic button. With your custom logic selected, select the block
accumulation logic.
Because the relay is completely programmable, it is necessary to program which logic variable monitors
breaker status (how the relay knows when the breaker is closed). Set the Breaker Status Logic by clicking
on the Logic button. With your custom logic selected, select the control logic.
Three breaker alarm points are programmable for checking breaker-monitoring functions. Each alarm
point can be programmed to monitor any of the three breaker monitoring functions or all three of the alarm
points can be programmed to monitor one function and alarm at various threshold levels. Use the pull-
down menu for Point 1 and select the preferred breaker-monitoring mode (function). With the Mode set,
the Threshold field is viable and has a zero threshold. Use the keyboard to enter the threshold value or
the appropriate (Up or Down) arrow buttons. Repeat the procedure for Breaker Alarm Points 2 and 3.