Basler BE1-CDS220, Instruction Manual

Page: 272 / 476

11-14 ASCII Command Interface BE1-CDS220
RG-GRPCNTRL Command
Purpose:
Report group logic override control status
Syntax: RG-GRPCNTRL
Example: RG-GRPCNTRL
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-INPUT Command
Purpose:
Report INPUT status
Syntax: RG-INPUT
Example: RG-INPUT
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-LOGIC Command
Purpose:
Report active logic
Syntax: RG-LOGIC
Example: RG-LOGIC
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-OUTCNTRL Command
Purpose:
Report OUTPUT CONTROL status
Syntax: RG-OUTCNTRL
Example: RG-OUTCNTRL
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-OUTSTAT Command
Purpose:
Report OUTPUT status
Syntax: RG-OUTSTAT
Example: RG-OUTSTAT
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-TARG Command
Purpose:
Report/Reset Target status
Syntax: RG-TARG
Example: RG-TARG or RG-TARG=0
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-TIME Command
Purpose:
Report/Set Time
Syntax: RG-TIME[=hr:mn:sc] or RG-TIME[=hr:mn{f}sc]
Example: RG-TIME=13:25:00 or RG-TIME=1:25P00 (Format(f) set by SG-CLK Command)
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-VER Command
Purpose:
Read Model #, Style #, Program Version, Serial #
Syntax: RG-VER
Example: RG-VER
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RL Command
Purpose:
Read Logic Variables (each Logic Variable is 32 bits long)
Syntax: RL-[n] where n = 1, 2 or 3
Example: RL or RL-1
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting