Basler BE1-CDS220, Instruction Manual

Page: 31 / 476

BE1-CDS220 General Information 1-19
1 A Current Sensing
Range: 0.1 to 30.0 A
Increment: 0.01 from 0.01 to 9.9 A, 0.1 from 10.0 to 30.0 A
Settable Time Delay Characteristics (#50T)
Definite time for any current exceeding pickup
Range: 0.00 to 60.0 seconds
Increment: 1 millisecond from 0 to 999 milliseconds
0.1 second from 1.0 to 9.99 seconds
1 second from 10 to 60 seconds
Accuracy:
#50TP, #50TN: ±0.5% or ±¼ cycle, whichever is greater, plus trip time for
instantaneous response (0.0 setting)
#50TQ: ±0.5% or ±1 cycle, whichever is greater, plus trip time for
instantaneous response (0.0 setting)
Trip Time for 0.0 Delay Setting
#50TP, #50TN: 1¼cycles maximum for current 5 times the pickup setting.
2 cycles maximum for current 1.5 times pickup.
4 cycles maximum for current 1.05 times the pickup setting
#50TQ: 2¼ cycles maximum for current 5 times the pickup setting.
3 cycles maximum for current 1.5 times pickup.
5 cycles maximum for current 1.05 times the pickup setting.
Breaker Failure (BF)
Current Detector Pickup: Fixed at 0.5 A for 5 A unit, 0.1 A for 1 A unit
Current Detector Pickup Accuracy:
±
10%
Delay Range: 50 to 999 milliseconds
Increments: 1 millisecond
Reset: Less than 1 cycle of the current being removed
Timer Accuracy:
±
0.5% or (+1
¼
, -
¼
cycles) whichever is greater
General Purpose Timers (62, 162)
Modes: PU/DO, 1 Shot Non-Retrig., 1 Shot Retrig., Oscillator, Integrating
and Latch.
Range: 0 to 9,999 seconds.
Increment: 1 millisecond from 0 to 999 milliseconds
0.1 second from 1.0 to 9.9 seconds
1 second from 10 to 9,999 seconds
Accuracy: ±0.5% or ±¾ cycles, whichever is greater
Automatic Setting Group Characteristics
Number of Setting Groups: 4
Switch Level
Range: 0 to 150% of the setting group 0 #51 Phase, Neutral, or
Negative-Sequence pickup setting
Accuracy
5 A Current Sensing: ±2% or ±50 mA
1 A Current Sensing: ±2% or ±10 mA
Switch Timer
Range: 0 to 60 minutes (0 = disabled)
Increment: 1 minute
Accuracy: ±0.5% or ±2 seconds, whichever is greater