Basler BE1-CDS220, Instruction Manual

Page: 375 / 476

BE1-CDS220 Testing And Maintenance 13-61
Table 13-62. Mode 2 Test Commands
Command Purpose
A= Gain write access
CS-143=1 Selects virtual switch 143 for change to closed (true) state
CO-143=1 Executes virtual switch 143 for change to closed (true) state
Step 4. Send the commands in Table 13-63 to the relay or, if the optional HMI is supplied, navigate to
screen \CTRL\43\143 to set the mode of the 143 switch to the FALSE state (logic 0). It is not
necessary to gain access for the following step unless access times out.
Result: OUT1 contact opens and remains open.
Table 13-63. Mode 2 Test Commands
Command Purpose
CS-143=0 Selects virtual switch 143 for change to open (false) state
CO-143=0 Executes virtual switch 143 for change to open (false) state
Virtual Switch Mode 3 Operation (Off/Momentary On)
Purpose : To verify virtual switch Mode 3 operation.
Reference Commands: SL-243, CS/CO-243
Step 1. Prepare for Mode 3 testing by transmitting the commands in Table 13-64 to the relay.
Table 13-64. Mode 3 Test Commands
Command Purpose
A= Gain write access
SL-N=NONE Zero out custom logic settings. Overwrite with
logic = none settings.
Y Confirm overwrite
SL-N=MODE3 Sets MODE3 as custom logic name
SL-243=3 Sets 243 to Mode 3 operation
SL-VO1=243 Enables OUT1 to close for 243
EXIT Exit
Y Save settings
Step 2. Prepare to monitor the virtual switch operation.
Step 3. Send the commands in Table 13-65 to the relay or, if the optional HMI is supplied, navigate to
screen \CTRL\43\243 to set the mode of the 243 switch to the pulse state.
Result: OUT1 contact closes for 200 milliseconds and returns to the open state.
Table 13-65. Mode 3 Test Commands
Command Purpose
CS-243=P Selects virtual switch 243 for change to closed (true) state and return open
CO-243=P Executes virtual switch 243 for change to closed (true) state and return open