ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 155 / 366

SuperTrak™ GEN3 System Operation and Maintenance Manual 143
Rev. 9 (12-2021)
Technician Procedures
This section provides the following technician procedures:
• Electrical Procedures on page 144
• Install a Power Supply on page 145
• Install a Power Supply on page 145
• Replace an Electrical Interconnect on page 176
• Replace a Coil Driver Board on page 150
• Replace a Gateway Board on page 157
• Replace an Encoder Assembly on page 165
• Replace a Motor Thermistor on page 168
• Replace the Main Motor Fuse on page 173
• Replace a Coil Fuse on page 174
• Replace an Electrical Interconnect on page 176
• Mechanical Procedures on page 191
• Install a Pallet on page 191
• Inspect a Pallet on page 195
• Replace a Pallet Bumper on page 198
• Replace the Pallet Flat Wheels on page 199
• Replace the Pallet V-Wheels on page 201
• Replace a Pallet Magnet Assembly on page 205
• Replace a Pallet Anti-Static Brush on page 206
• Adjust a Pallet Shim on page 207
• Replace a Pallet Lubrication Felt on page 210
• Replace a Pallet Spring on page 211
• Replace a Pallet Encoder Strip Assembly on page 212
• Install a Station Setup Fixture on page 214
• Align a Pallet Encoder Strip Assembly on page 215
• Replace an Upper V-Rail on page 230
• Replace a Flat Wear Strip on page 238
• Replace a Motor Cover Label on page 243
• Replace a Straight Section on page 244