ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 283 / 366

SuperTrak™ GEN3 System Operation and Maintenance Manual 271
Rev. 9 (12-2021)
System Specifications
This section provides SuperTrak conveyance platform system specifications.
Information in this section is for general reference and may be updated without
notice. Be sure you are using the most current version of this user manual.
For details on the system’s individual components, see Appendix C: Component
Data Sheets on page 299.
Performance
The SuperTrak conveyance platform is designed to meet the following optimal
performance
a
:
Performance Description Value
Maximum speed 4 m/s (13.1 ft./s)
Acceleration 1g with 10 kg (22 lb) payload
4g with 1 kg (2.2 lb) payload
Payload
10+ kg (22+ lb) per pallet
1
1. Higher payloads are possible. Contact ATS with application details.
Stop repeatability - straight section ± 0.01 mm (0.00039 in.)
Stop repeatability - curved sections ± 0.025 mm (0.001 in.)
Communication EtherNet/IP, PROFINET, POWERLINK, and
EtherCAT
2
2. Other protocols are possible. Contact ATS if other protocols are required.
Number of supported pallets As many as can physically fit on the track length
Process on curve Yes, full control
Pallet options Standard configuration with 2 or 3 magnet array
options
Collision avoidance Built in
Power consumption
10W/section, 150-275W/pallet
3
3. Power consumption varies depending on the aggressiveness of the application: it may be less
with less demanding requirements or more with more demanding requirements.
a
Performance does not include supplied product defects, operator error, operator training, or failure of
services.
See Appendix C: Component Data Sheets on page 299 for additional information
about individual system components.
Servo update rate 800 µs typical