ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 103 / 366

Installation
SuperTrak™ GEN3 System Operation and Maintenance Manual 91
Rev. 9 (12-2021)
b. Loosen the four (4) screws
on each of the three
stands.
c. Loosen the upper lock nut.
d. Turn the leveling screw as
required, to raise or lower
the side of the 90 deg.
section.
e. Use a level to verify that the 90 deg. section is level.
f. If the 90 deg. section is not level, repeat steps 4c to 4d.
g. Tighten the upper lock nut.
5. Tighten the twelve (12) screws from step 4b, and the six (6) screws from
step 3.