ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 40 / 366

28 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
SuperTrak Conveyance Platform Overview
Straight Section - Left Coil Driver Board
If the SuperTrak conveyance platform is programmed with more than one
safety circuit (different guard zones), remove the 28VDC motor power
connection from the zone boundaries.
See the
SuperTrak Conveyance Platform Electrical Drawings for
additional information.
The left coil driver board and the right coil driver board are the same. The
connections to the gateway boards are different, so they are referenced
as the “left” or “right” coil driver board.
A
50A fuse
a
a.See Replace the Main Motor Fuse on page 173.
G
Common connection
B
Motor power connection for a power
supply
H
Ribbon cable connection - connects to
the far left of the coil driver board
C
Coil fuse
(1 of 10; one for each coil)
I
Ribbon cable connection - connects to
the inner-left of the coil driver board
D
Coil connection
b
(1 of 5; two coils for each connection)
b.The coil wires on the high power section are of larger gauge than the coil wires on the low power
section.
J
24V digital power cable
(battery backup)
E
Frame ground connection
K
Gateway network cable
F
Motor power connection
c
c.The motor power connection is 28VDC between two (2) high power sections, and 15VDC between
two (2) low power sections. There is no motor power connection between a high power section and
a low power section.
L
Thermistor connector (1 of 5)