ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 285 / 366

System Specifications
SuperTrak™ GEN3 System Operation and Maintenance Manual 273
Rev. 9 (12-2021)
Installation Requirements
Service Specification Value
Power supply
(high power)
Input rating 1 phase x 200-240VAC
50/60 Hz
Output rating 28VDC
1500W
Fuses/circuit breaker 10 A UL489 breaker
Type CC fuses, or type J fuses
Terminal connection
cross-section Connect as per local requirements for 10A
Permitted mounting
orientations • Vertical with the
air filter down.
• Horizontal with
the access panel
facing down.
• Any orientation if mounted inside a
sufficient enclosure with adequate
cooling.
Power supply
(low power)
Input rating 1 phase x 200 to 240VAC, 50/60 Hz
Output rating 15VDC, 320W
Fuses/circuit breaker 10A class CC or J
Terminal connection
cross-section Connect as per local requirements for 10A
Permitted mounting
orientations Same as 28V supply
Straight section Input rating 28VDC
100A peak
Output rating Force of up to 150N/pallet
Fuses/circuit breaker 50A fuses
Terminal connection
cross-section
16 mm
2
cables terminated with a wire lug
Permitted mounting
orientations Horizontal upright, or vertical over/under