ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 45 / 366

SuperTrak Conveyance Platform Overview
SuperTrak™ GEN3 System Operation and Maintenance Manual 33
Rev. 9 (12-2021)
C
Motor Produces the electromagnetic force that propels the
pallets. The motor includes:
• Potted coils
• Iron core lamination assembly
See Coils on page 39 for information about coil
numbering.
D
Stand (1 of 3) Mounts the section to the SuperTrak conveyance
platform frame.
180 deg. (500 mm) sections are available with
standard-height stands as shown, or low-profile stands.
E
Ground wire Provides the single point earth ground for the SuperTrak
conveyance platform.
Although each SuperTrak conveyance platform has two
(2) 180 deg. sections, only one (1) 180 deg. section
contains a single point earth ground wire. The single
point earth ground wire is connected from the bottom
plate of the 180 deg. section to the main electrical
panel.
F
Wedge adjust Connects the 180 deg. section to a straight section.
G
Electrical interconnect Houses the power and network cables.
See
Interconnect (SuperTrak Control Panel to Curved
Section) on page 350.
H
Right encoder assembly Measures the pallet position using encoder read heads.
See
Encoder Assemblies on page 38 for information
about encoder numbering.
I
Left encoder assembly
J
Magnetic shunt Provides magnetic field continuity between adjacent
sections.
K
Right coil driver board See Right Coil Driver Board on page 31.
L
Left coil driver board See Straight Section - Left Coil Driver Board on page
28, or Left Coil Driver Board with a Power Supply
Connected on page 29
M
Gateway board See Gateway Board on page 30.
ID Component Name Description