ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 160 / 366

148 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Technician Procedures
d. Align the negative (-) common
wire from the left electrical
interconnect, and the negative (-)
common wire of the power supply
with the common connection.
These two (2) wires both have a
white stripe on them.
e. Repeat step 8c.
f. Verify that the wiring is the same
as the Left Coil Driver Board with a Power Supply Connected on page
29.
9. Feed the AC power input cable through
the cable entry plate at the back of the
control panel.