ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 133 / 366

Controls and Connections
SuperTrak™ GEN3 System Operation and Maintenance Manual 121
Rev. 9 (12-2021)
Ethernet POWERLINK Connection
The Ethernet POWERLINK connection exists in the control panel when it is shipped.
One end of an Ethernet cable is plugged into the front port of Slot 2 on the
controller, and the other end of the cable is plugged into IF1 of the bus controller,
as illustrated:
ID Connection
Number Connection Type Description
A
N/A N/A Ethernet POWERLINK connection location.
B
13K0:IF1/1 RJ45 POWERLINK
connection Connects to the controller (slot 2, front port).
C
14K3:1F1 RJ45 POWERLINK
connection Connects to the bus controller (upper port).