ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 196 / 366

184 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Technician Procedures
• For the 90 deg.section, the
connection is located on the
right side of the right coil
driver board that is in the left
electrical panel.
6. As applicable, connect the 24 VDC digital power wire (DIG+) to the J17
connector on the gateway board of the curved section:
• For the 180 deg. (500 mm)
section, the connection is located
on the gateway board inside the
section.