ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 182 / 366

170 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Technician Procedures
3. Open the straight section electrical door.
Access to the motor thermistor, which is located through the small hole in the
cabinet (A), is blocked by the electrical interconnect (B).
Remove the electrical interconnect.
See Replace an Electrical Interconnect on page 176.
4. Once the electrical interconnect is removed, look for the motor thermistor and
wire through the hole in the cabinet. Use needle-nose pliers to gently pull the
wire through the hole..