ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 206 / 366

194 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Technician Procedures
3. Pry or tilt the pallet away from the
motor: firmly hold both pallet removal
tool handles, and then pull the right
handle while resisting with the left
handle
At approximately 15 degrees the
magnetic pull decreases and the pallet
can be removed from the motor.
4. Slide a keeper plate over the pallet
magnet assembly with the polycarbonate
side of the keeper plate against the
pallet magnet.
The keeper plate reduces the magnetic
field produced by the magnet. The lexan
creates a gap between the magnets and
the steel plate. Hold the keeper plate in a
manner that avoids fingers getting
caught between the keeper plate and the magnets.