ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 191 / 366

Technician Procedures
SuperTrak™ GEN3 System Operation and Maintenance Manual 179
Rev. 9 (12-2021)
Install an Electrical Interconnect Between a Curved
Section and a SuperTrak Control Panel
The electrical interconnect has four (4) wires on one end and five (5) wires on the
other, it also includes a left network patch cable (not shown), an F-F coupler, and
three (3) ferrites.
Use only ATS approved network cables for connecting the SuperTrak G3
Controller to the first section; otherwise, the system may operate
incorrectly.
A
24VDC digital power
(red or blue)
D
Ethernet cables - left and right network
cables (blue)
B
Digital shield cable
(black)
E
F-F coupler
C
Common connection
(black or white with blue stripe)
F
Ferrite (1 of 3)
SuperTrak control panel
connections
Curved section connections