ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 199 / 366

Technician Procedures
SuperTrak™ GEN3 System Operation and Maintenance Manual 187
Rev. 9 (12-2021)
9. As applicable, connect the left network patch cable to the F-F coupler:
• For the 180 deg. (500 mm)
section, connect the cable
opposite from the left network
cable.
• For the 180 deg. (800 mm)
section, connect the cable
opposite from the left network
cable.
• For the 90 deg. section, connect
the cable opposite from the left
network cable (as indicated).
10. Verify that a ferrite exists on the end of each gateway network cable entering
the 180 deg. section from the adjoining straight section.
Make sure each ferrite is within 10 cm (4 in.) of the connector.