ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 144 / 366

132 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Operating Procedures
Pre-Power ON Checks
Complete the pre-power ON check procedure before you turn the SuperTrak
conveyance platform power ON:
• After completing a new SuperTrak conveyance platform installation.
• After a straight section or curved section is added or removed.
• After a circuit board is replaced.
• After a power cable is replaced.
Prerequisites
• Digital multimeter
• Set of metric hex keys
Procedure
1. Open the electrical door of a straight section.
2. Set a digital multimeter to measure resistance.
3. Measure the resistance between the following:
• Motor power connection and the common connection.
See Measure the Resistance Between the Motor Power Connection
and the Common Connection on page 133.
• Ground (frame) and the common connection.
See Measure the Resistance Between the Ground (Frame) and the
Common Connection on page 134.
• Common connection and the 24V digital power connection.
See Measure the Resistance Between the Common Connection and
the 24V Digital Power Connection on page 135.
• Motor power connection and the 24V digital power connection.
See Measure the Resistance Between the Motor Power Connection
and the 24V Digital Power Connection on page 136.
4. If all step 3 resistance tests pass, it is safe to turn the SuperTrak conveyance
platform power ON.
• Before the SuperTrak conveyance platform power is turned ON for the
first time, complete the pre-power ON checks.
• If any straight or curved section is added or removed, complete the
pre-power ON checks.
• If a circuit board or power cable is replaced, complete the pre-power
ON checks.