ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 214 / 366

202 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Technician Procedures
6. Remove the screw and washer that
secures the v-wheel in position.
7. Repeat step 6 for the second v-wheel.
8. Attempt to manually pull the v-wheel
shaft out. If snug, thread a dowel puller
into the shaft and pull the shaft out.
9. Repeat step 5 for the second shaft.
10. Remove the v-wheel and the spacer that
is on the bottom of the v-wheel.
Place the spacer in a safe location.