ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 94 / 366

82 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Installation
d. Repeat step a to c for the second cross-brace.
e. Secure the cross-brace in position
with four (4) screws.
f. Tap two (2) dowels halfway into
the cross-brace. Make sure the
dowel remains above the cross-
brace surface.
g. Repeat steps a to f for the second cross-brace.
2. Install the first straight section on the frame:
a. Lift and position a straight section
on the frame.
Roughly center the straight
section stands on the cross-
braces. Make sure the straight
section electrical box faces away
from the frame.