ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 246 / 366

234 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Technician Procedures
4. Remove fifteen (15) screws from the upper
v-rail, and remove the screws from the
adjacent sections as well.
See Replace an Upper V-Rail - Straight
Section on page 230.
5. Note the position of the 0.25 mm (0.01 in.) shim, and then place the shim in a
safe location.
6. Lifting the section of interest, free
adjacent V-slots between this section
and adjacent sections so that the V-rail is
free to be lifted the rest of the way.
7. Slide the upper v-rail out in the forward direction clear of the motor.
The v-slots at the ends of the upper v-rail prevent it from being lifted straight
up.
8. Clean the top of the section with a soft cloth to remove any debris.