ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 215 / 366

Technician Procedures
SuperTrak™ GEN3 System Operation and Maintenance Manual 203
Rev. 9 (12-2021)
Install the Pallet V-Wheels
1. Hold the new v-wheel so that the side with
the groove is facing up.
2. Hold a spacer on the bottom of the new
v-wheel and insert them into the pallet
body.
For ease of assembly, rest the pallet on
the shoulder screws or upside down on
the encoder strip assembly.
3. Align the spacer and v-wheel holes with the holes in the pallet body.
4. Manually insert the shaft through the
v-wheel and spacer.
If tight, use a mallet to gently tap the
shaft until the top of the shaft is flush with
the pallet body.
5. Repeat steps 1 to 4 for the second
v-wheel.