ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 318 / 366

306 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Appendix C: Component Data Sheets
Minimum pitch from
center-to-center of
two (2) pallets (as
measured along the flat
rail)
Straight section
(with bumpers) 167 mm (6.57 in.) 200 mm (7.87 in.)
Straight section
(without bumpers) 154 mm (6.06 in.) 200 mm (7.87 in.)
180 deg (500 mm)
section 175 mm (6.89 in.) 200 mm (7.87 in.)
180 deg (800 mm)
section 163 mm (6.42 in.) 200 mm (7.87 in.)
90 deg. section 163 mm (6.42 in.) 200 mm (7.87 in.)
Payload Pallets See Pallet Linear Acceleration Vs. Payload
on page 308, Pallet Linear Acceleration Vs.
Payload on page 308, and Pallet Magnet
Recommendations on page 309.
Repeatability
a
Straight section (X-
axis) ±0.01 mm (±0.00039 in.)
Straight section (Y-
axis) ±0.015 mm (±0.00059 in.)
Straight section (Z-
axis) ±0.025 mm (±0.00098 in.)
Curved sections (X,
Y, and Z-axis) ±0.025 mm (±0.00098 in.)
Speed (max.)
a
Straight section 4 m/s (13.1 ft./s)
Curved section 4 m/s (13.1 ft./s)
Maximum tilting angle
d
Pallets 0.377°
Specification Applicable For
Value
2-Magnet Assembly 3-Magnet Assembly