ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 217 / 366

Technician Procedures
SuperTrak™ GEN3 System Operation and Maintenance Manual 205
Rev. 9 (12-2021)
Replace a Pallet Magnet Assembly
1. Remove the pallet from the SuperTrak
conveyance platform.
See Remove a Pallet on page 193.
2. Remove the four (4) screws and two (2)
shoulder bolts from the front cover plate.
3. Remove the front cover plate from the
pallet.
4. While supporting the magnet assembly,
remove the two (2) or four (4) magnet
assembly screws (as required).
5. Align the new magnet assembly
(2-magnet or 3-magnet, as required) with
the pallet dowel holes.
The magnet assembly can only be
installed in one direction: it cannot be
assembled upside down.
6. As required, secure the 2-magnet assembly in position with two (2) screws, or
the 3-magnet assembly with four (4) screws.
7. Align the front cover plate with the pallet.
8. Secure the front cover plate in position with four (4) screws and two (2)
shoulder bolts.