ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 41 / 366

SuperTrak Conveyance Platform Overview
SuperTrak™ GEN3 System Operation and Maintenance Manual 29
Rev. 9 (12-2021)
Left Coil Driver Board with a Power Supply Connected
This drawing indicates the connections that are different on the left coil driver
board when a power supply is connected.
If the SuperTrak conveyance platform is programmed with more than one
safety circuit (different guard zones), remove the 28VDC motor power
connection from the zone boundaries.
See the
SuperTrak Conveyance Platform Electrical Drawings for
additional information.
The left coil driver board and the right coil driver board are the same. The
connections to the gateway boards are different, so they are referenced
as the “left” or “right” coil driver board.
A
50A fuse
a
a.See Replace the Main Motor Fuse on page 173.
C
Motor power connection
b
b.The motor power connection is 28VDC between two (2) high power sections, and 15VDC between
two (2) low power sections. There is no motor power connection between a high power section and
a low power section.
B
Power supply connection:28VDC for
standard straight section, or 15VDC
for a low power straight section
D
Common connection