ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 98 / 366

86 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Installation
4. Level the 180 deg. section:
a. Place a precision spirit level across
the frame in the directions
illustrated, to determine the
leveling foot (or feet) that requires
adjustment.
For more precise measurements,
remove the top cover from the
180 deg. section before leveling.
b. Loosen the upper lock nut.
c. Turn the leveling screw as
required, to raise or lower the side
of the 180 deg. section.
d. Use a level to verify that the 180 deg. section is level.
e. If the 180 deg. section is not level, repeat steps c to d.
f. Tighten the upper lock nut.
5. Tighten the three (3) screws from step 3.