ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 258 / 366

246 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Maintenance
Electrical Enclosure
Pallets Monthly Inspect Inspect each pallet for wear.
See
Inspect a Pallet on page 195.
Monthly, or as
determined
for your
application Lubricate Add lubricant to the pallet.
See
Lubricate the Pallet Lubrication
Felt on page 250.
Monthly Clean • Clean the pallet body. Wipe off
debris using a clean, soft, cloth.
• Clean the magnet assembly. Wipe
metal debris to a corner or edge of
the magnet and then pull it off.
• Clean the pallet encoder strip. See
Clean a Pallet Encoder Strip on
page 248.
Power supply Monthly Inspect Inspect the air filter for dirt and debris.
If required, replace the filter.
See
Replace a Power Supply Filter on
page 249.
Table and
Supporting
Structure Weekly Clean Clean off debris, using a clean, soft
cloth.
Component Frequency Task Description
Fan Monthly Inspect Inspect for damage and loose
connections. If required, repair or
replace.
As Required Clean Clean off debris, using a clean, soft
cloth.
Filter Monthly Inspect Inspect the condition of the filter. If
required, vacuum, wash or replace.
See
Clean a Control Panel Air Filter on
page 247.
Component Frequency Task Description