ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 260 / 366

248 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Maintenance
Clean a Pallet Encoder Strip
1. Gently wipe the encoder strip with a soft, dry, clean cloth.
2. Inspect the encoder strip, to make sure it is not damaged.
See Inspect a Pallet Encoder Strip on page 248.
Inspect a Pallet Encoder Strip
Inspect the encoder strip with magnetic viewing film, to verify that the poles
appear correctly.
Each pole should be vertical to one another. If the poles appear damaged, replace
the encoder strip.
Never use a magnet to clean the encoder strip. Contact with magnetic
material will cause permanent damage to the magnetic encoder strip.