ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 298 / 366

286 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Appendix A: Hardware Torque Specifications
180 deg. (500 mm)
section top cover M5-0.8x10 SHCS Zinc Plated 12.9 912 10 10
Encoder M3-0.5x8 SHCS Zinc Plated 12.9 912 10 2
Upper v-rail
180 deg. (500 mm)
M6-1.0x14 SHCS Zinc Plated 12.9 912 11 16
Upper v-rail
180 deg. (800 mm)
and 90 deg.
M8-1.25x16 SHCS Zinc Plated 12.9 912 3 40
M8 Lock
Washer Zinc Plated 127 3
Interconnect 24VDC
motor and cable M5-0.8x14 SHCS Zinc Plated 12.9 912 2 9
M5 Int.
Tooth
Washer Zinc Plated 6797 2
M5 Flat
Washer Zinc Plated 125 2
Interconnect com
cable M6-1.0x14 SHCS Zinc Plated 12.9 912 2 11
M6 Int.
Tooth
Washer Zinc Plated 6797 2
M6 Flat
Washer Zinc Plated 125 2
Interconnect to
cabinet ground M6-1.0x14 SHCS Zinc Plated 12.9 912 2 11
M6 Int.
Tooth
Washer Zinc Plated 6797 2
M6 Flat
Washer Zinc Plated 125 2
50A fuse to coil
driver PCB M5-0.8x8 SHCS Zinc Plated 12.9 912 1 2.7
M5 Int.
Tooth
Washer Zinc Plated 6797 1
M5 Flat
Washer Zinc Plated 125 1
Coil driver board to
bus bar M4-0.7x12 SHCS Zinc Plated 12.9 912 13 2
M4 Int.
Tooth
Washer Zinc Plated 6797 13
M4-0.7x12 Phillips
head
nylon
screw None 7985 1
Location
Description Size Type Finish Class DIN Qty
per
Torque
(Nm)