ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 311 / 366

SuperTrak™ GEN3 System Operation and Maintenance Manual 299
Rev. 9 (12-2021)
Appendix C: Component Data
Sheets
This section provides information about SuperTrak components. Information in this
section is for general reference and may be updated without notice. Be sure you
are using the most current version of this user manual.
The following table summarizes the SuperTrak GEN3 components. Use the cross-
references to located the data sheets for each component.
Component Size Option 1 Option 2 Data Sheet
Straight section
a
1000 mm
(39.37 in.)
length
a
No stands Front-
mounted
electronics
(FME)
a
See Straight
Section with
FME Data Sheet
on page 314.
Standard-height
stands
a
345 mm (13.58
in.)
Rear-
mounted
electronics
(RME) See Straight
Section with
RME Data Sheet
on page 317.
Low-profile
stands
158 mm (6.23
in.)
90 deg. section 600 mm
radius Standard-height
stands
a
345 mm (13.58
in.)
See 90 Deg.
Section on page
329.