ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 213 / 366

Technician Procedures
SuperTrak™ GEN3 System Operation and Maintenance Manual 201
Rev. 9 (12-2021)
Replace the Pallet V-Wheels
Inspect the v-wheels for gouges, pits, or wear; replace if they are worn or
damaged.
Pallet v-wheel wear varies depending on the system application. It is
recommended that you verify the accuracy of critical pallet features over time, as
required by the application. This allows you to compare the measurements to your
process limits and recognize when replacement is necessary.
See Typical Pallet Wheel Lifespan on page 304 for additional information.
Remove the Pallet V-Wheels
1. Remove the pallet from the SuperTrak conveyance platform.
See Remove a Pallet on page 193.
2. Remove the two (2) screws that secure
the anti-tip block in position.
3. Remove the anti-tip block.
4. Repeat steps 2 to 3 for the second anti-tip
block.
5. Remove the two (2) plastic caps on the
top of the pallet.
For ease of disassembly, rest the pallet on
the shoulder screws or on the encoder
strip assembly.
It is recommended to replace the pallet v-wheels in pairs.