ABB ACSM1 Series, Manual

Page: 90 / 510

Parameters and firmware blocks
90
Note: Pointing to a non-existing bit will be interpreted as 0 (FALSE).
For additional parameter data, eg, update cycles and fieldbus equivalents, see
chapter
Parameter data .
Firmware blocks
Firmware blocks accessible from the DriveSPC PC tool are described in the
parameter group that contains the most of the block inputs/outputs. Whenever a
block has inputs or outputs outside the current parameter group, a reference is
given. Likewise, parameters have a reference to the firmware block they are
included in (if any).
Note: Not all parameters are available through firmware blocks.
(
-( ,#
*.
-( #,#
##
(.!
-( !##
#"
.
-( #
/
.
(
( (##
( */,"/
( +" #
( 0"
! #%
! (##"#
! *" "#1
1 Inputs
2 Outputs
3 Input parameter values
4 Pointer parameter indicator “<“
5 Parameter 26.01 is set to value P.1.1, ie, parameter 1.01 SPEED ACT. The “7” means the parameter can
be found on page 7 of DriveSPC.
6 Information of the block internal execution order (“TLF4”) and time level (“250 µsec”). Time level, ie,
update cycle, is application-specific. See the time level of the block in DriveSPC.
7 Firmware block ID number in the application program
8 Firmware block execution order for the selected update cycle ID
2
3
6
7
8
4
5
1