LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
662
User Manual 1173.9628.02 ─ 16
Suffix:
<no>
.
1
Only SCC1 supported - suffix can be omitted
Return values:
<Reliability>
<Power>
n power values, one value per resource block
Range:
-100 dB to 10 dB
Default unit: dB
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V3.2.70
Options:
R&S CMW-KM502/-KM552 for FDD/TDD
FETCh:LTE:MEAS<i>:MEValuation:IEMission[:PCC]:MARGin:CURRent?
FETCh:LTE:MEAS<i>:MEValuation:IEMission[:PCC]:MARGin:AVERage?
FETCh:LTE:MEAS<i>:MEValuation:IEMission[:PCC]:MARGin:EXTReme?
FETCh:LTE:MEAS<i>:MEValuation:IEMission[:PCC]:MARGin:SDEViation?
Return the limit line margin results for the PCC diagram. The
CURRent
margin indi-
cates the minimum (vertical) distance between the inband emissions limit line and the
current trace. A negative result indicates that the limit is exceeded.
The
AVERage
,
EXTReme
and
SDEViation
values are calculated from the current mar-
gins. The margin results cannot be displayed at the GUI.
Return values:
<Reliability>
<OutOfTolerance>
Out of tolerance result, i.e. percentage of measurement inter-
vals of the statistic count for modulation measurements exceed-
ing the specified inband emission limits.
Range:
0 % to 100 %
Default unit: %
<Margin>
Range:
-50 dB to 110 dB
Default unit: dB
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V2.0.10
FETCh:LTE:MEAS<i>:MEValuation:IEMission:SCC<no>:MARGin:CURRent?
FETCh:LTE:MEAS<i>:MEValuation:IEMission:SCC<no>:MARGin:AVERage?
Command Reference
深圳德标仪器
135-1095-0799