LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
134
User Manual 1173.9628.02 ─ 16
2.4.7.3
Fading Module AWGN
The following parameters enable and configure the AWGN insertion on the fading
module. For background information, see
chapter 2.2.5.2, "AWGN Generator"
For carrier aggregation scenarios, you can configure different settings for PCC and
SCC.
Fig. 2-55: AWGN settings
Enable
Enables/disables AWGN insertion via the fading module.
Remote command:
Min. Noise/System BW Ratio
Configures the minimum ratio between the noise bandwidth and the cell bandwidth.
Remote command:
Noise Bandwidth
Displays the actual noise bandwidth, resulting from the "Min. Noise/System BW Ratio"
and the cell bandwidth.
Remote command:
Effective Signal BW
Displays the part of the cell bandwidth that is dedicated to the downlink subcarriers.
Signal/Noise Ratio
Specifies the signal to noise ratio.
Remote command:
GUI Reference
135-1095-0799