LTE SRS Measurement
R&S
®
CMW-KM5xx/-KS5xx
845
User Manual 1173.9628.02 ─ 16
CONFigure:LTE:MEAS<i>:SRS:SCOunt:PDYNamics
<StatisticCount>
Specifies the statistic count of the measurement. The statistic count is equal to the
number of measurement intervals per single shot. Use
CONFigure:...:MEAS<i>:...:REPetition SINGleshot | CONTinuous
to
select either single-shot or continuous measurements.
See also: "Statistical Settings" in the R&S
CMW user manual, chapter "Remote Con-
trol"
Parameters:
<StatisticCount>
Number of measurement intervals
Range:
1 to 1000
*RST:
1
Example:
See
Specifying Additional Measurement-Specific Settings
Firmware/Software:
V2.0.20
Manual operation:
See
CONFigure:LTE:MEAS<i>:SRS:HDMode
<HighDynamicMode>
Enables or disables the high dynamic mode for power dynamics measurements.
Parameters:
<HighDynamicMode> OFF | ON
*RST:
OFF
Example:
See
Specifying Additional Measurement-Specific Settings
Firmware/Software:
V2.1.25
Manual operation:
See
5.5.3.3
Trigger Settings
The following commands define the trigger parameters.
TRIGger:LTE:MEAS<i>:SRS:CATalog:SOURce?
..............................................................845
TRIGger:LTE:MEAS<i>:SRS:SOURce
............................................................................. 846
................................................................................846
TRIGger:LTE:MEAS<i>:SRS:THReshold
..........................................................................846
................................................................................. 847
................................................................................ 847
TRIGger:LTE:MEAS<i>:SRS:CATalog:SOURce?
Lists all trigger source values that can be set using
.
Return values:
<Sourcelist>
Comma separated list of all supported values. Each value is rep-
resented as a string.
Command Reference
深圳德标仪器
135-1095-0799