LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
618
User Manual 1173.9628.02 ─ 16
3.5.3.7
BLER Measurement Settings
The following commands specify settings for the Block Error Ratio measurement.
CONFigure:LTE:MEAS<i>:MEValuation:BLER:SFRames
<Subframes>[,
<SchedSubfrPerFr>]
Specifies the statistic count (number of measured subframes) and the number of
scheduled subframes per radio frame for the BLER measurement. BLER is a single
shot measurement.
See also: "Statistical Settings" in the R&S
CMW user manual, chapter "Remote Con-
trol"
Parameters:
<Subframes>
Number of subframes to be measured
Range:
1 subframe to 200E+3 subframes
*RST:
10E+3 subframes
<SchedSubfrPerFr> Number of scheduled subframes per radio frame in the gener-
ated downlink signal
Range:
1 subframe to 10 subframes
*RST:
9 subframes
Example:
See
Specifying Additional Measurement-Specific Settings
Firmware/Software:
V1.0.15.21
V3.0.10: added <SchedSubfrPerFr>
Manual operation:
See
3.5.3.8
List Mode Settings
The following commands configure the list mode. For retrieving list mode results see
chapter 3.5.3.32, "List Mode Results (One Segment)"
on page 683 and
ter 3.5.3.33, "List Mode Results (All Segments, One Result)"
For a description of the list mode see
The segment number <no> in the following commands refers to the complete range of
configured segments (1..2000).
CONFigure:LTE:MEAS<i>:MEValuation:LIST
................................................................... 619
CONFigure:LTE:MEAS<i>:MEValuation:LIST:LRANge
...................................................... 619
CONFigure:LTE:MEAS<i>:MEValuation:LIST:OSINdex
..................................................... 619
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:SETup
.................................. 620
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:TDD
......................................622
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:RBALlocation
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:MODulation
........................... 623
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:SEMask
................................ 625
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:ACLR
....................................625
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:PMONitor
.............................. 626
TRIGger:LTE:MEAS<i>:MEValuation:LIST:MODE
.............................................................627
Command Reference
深圳德标仪器
135-1095-0799