LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
179
User Manual 1173.9628.02 ─ 16
UL Dynamic Scheduling
With uplink dynamic scheduling, the UE gets uplink grants only upon request. Further-
more, MAC padding is disabled automatically.
Enable dynamic scheduling to force DRX, but allow the UE to get an UL grant upon
request.
If you want to force DRX without allowing any uplink grants, disable dynamic schedul-
ing, set the number of UL RBs to zero and disable MAC padding.
If connected DRX is disabled, the "UL Dynamic Scheduling" parameter has no effect.
For scheduling type SPS, "UL Dynamic Scheduling" is disabled.
Remote command:
2.4.12.5
RMC Connection Settings
The parameters in this section configure a 3GPP conform reference measurement
channel (RMC). The settings apply if
To configure the RMC, proceed as follows (for UL and DL):
1. Select the cell bandwidth (see
chapter 2.4.10, "Physical Cell Setup"
2. Select the number and position of allocated Resource Blocks (RB).
3. Select the modulation type.
For valid parameter combinations and background information see
The RMC settings can be changed in all main connection states including "Connection
Established".
For carrier aggregation scenarios, you can configure different downlink settings for
PCC and SCC.
GUI Reference
深圳德标仪器
135-1095-0799