LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
392
User Manual 1173.9628.02 ─ 16
CONFigure:LTE:SIGN<i>:CONNection:CSFB:GSM
...........................................................402
CONFigure:LTE:SIGN<i>:CONNection:CSFB:WCDMa
...................................................... 402
CONFigure:LTE:SIGN<i>:CONNection:AMDBearer
...........................................................404
CONFigure:LTE:SIGN<i>:CONNection:GHOPping
<Enable>
Enables or disables group hopping.
Parameters:
<Enable>
OFF | ON
*RST:
OFF
Example:
See
Configuring General Connection Settings
Firmware/Software:
V3.0.30
Options:
R&S CMW-KS510
Manual operation:
See
CONFigure:LTE:SIGN<i>:CONNection:UECategory:MANual
<UECatManual>
Configures the UE category to be used by the R&S
CMW if no reported value is availa-
ble or usage of the reported value is disabled, see
.
Parameters:
<UECatManual>
Range:
1 to 7
*RST:
5
Example:
See
Configuring General Connection Settings
Firmware/Software:
V3.0.10
V3.2.70: range enhanced to 7
Manual operation:
See
CONFigure:LTE:SIGN<i>:CONNection:UECategory:REPorted
<UseReported>
Enable or disable usage of the UE category value reported by the UE.
When disabled, the UE category must be set manually, see
. The manually set value is also used
if no reported value is available.
Parameters:
<UseReported>
OFF | ON
*RST:
ON
Return values:
<UECatReported>
UE category reported by the UE (NAV indicates that none has
been reported)
Range:
1 to 5
Command Reference
135-1095-0799