LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
643
User Manual 1173.9628.02 ─ 16
<Band>
Range for <FrequencyStart> and <FrequencyEnd>
14
0 MHz to 5 MHz
30
0 MHz to 6 MHz
50
0 MHz to 10 MHz
100
0 MHz to 15 MHz
150
0 MHz to 20 MHz
200
0 MHz to 25 MHz
CONFigure:LTE:MEAS<i>:MEValuation:LIMit:SEMask:LIMit<no>:
ADDitional<Table>:CBANdwidth<Band>
<Enable>, <FrequencyStart>,
<FrequencyEnd>, <Level>, <RBW>
Defines additional requirements for the emission mask area <no>. The activation state,
the area borders, an upper limit and the resolution bandwidth must be specified.
The emission mask applies to the channel bandwidth <Band>. Three tables of addi-
tional requirements are available.
Suffix:
<Band>
.
14,30,50,100,150,200
Channel bandwidth in 0.1 MHz
<no>
1..12
Number of emission mask area
<Table>
1..3
Set of additional requirements
1 = NS_03 / NS_11, 2 = NS_04, 3 = NS_06 / NS_07
Parameters:
<Enable>
OFF | ON
OFF
: disables the check of these requirements
ON
: enables the check of these requirements
*RST:
depends on channel bandwidth, area number and
set of requirements
<FrequencyStart>
Start frequency of the area, relative to the edges of the channel
bandwidth
Range:
see table below
*RST:
depends on channel bandwidth, area number and
set of requirements
Default unit: Hz
<FrequencyEnd>
Stop frequency of the area, relative to the edges of the channel
bandwidth
Range:
see table below
*RST:
depends on channel bandwidth, area number and
set of requirements
Default unit: Hz
Command Reference
深圳德标仪器
135-1095-0799
