LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
675
User Manual 1173.9628.02 ─ 16
The ranges indicated below apply to all results except standard deviation results. The
minimum for standard deviation results equals 0. The maximum equals the width of the
indicated range divided by two. Exceptions are explicitly stated.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Return values:
<1_Reliability>
<2_OutOfTol>
Out of tolerance result, i.e. percentage of measurement inter-
vals of the statistic count for modulation measurements exceed-
ing the specified equalizer spectrum flatness limits.
Range:
0 % to 100 %
Default unit: %
<3_Ripple1>
Max (Range 1) - Min (Range 1)
Range:
0 dB to 40 dB
Default unit: dB
<4_Ripple2>
Max (Range 2) - Min (Range 2)
Range:
0 dB to 40 dB
Default unit: dB
<5_MaxR1MinR2>
Max (Range 1) - Min (Range 2)
Range:
-40 dB to 40 dB
Default unit: dB
<6_MaxR2MinR1>
Max (Range 2) - Min (Range 1)
Range:
-40 dB to 40 dB
Default unit: dB
<7_MinR1>
Min (Range 1)
Range:
-20 dB to 20 dB
Default unit: dB
<8_MaxR1>
Max (Range 1)
Range:
-20 dB to 20 dB
Default unit: dB
<9_MinR2>
Min (Range 2)
Range:
-20 dB to 20 dB
Default unit: dB
<10_MaxR2>
Max (Range 2)
Range:
-20 dB to 20 dB
Default unit: dB
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V2.0.10
V2.1.25: added <7_MinR1> to <10_MaxR2>
Command Reference
深圳德标仪器
135-1095-0799