LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
192
User Manual 1173.9628.02 ─ 16
The address pool is configured globally, see "Setup" dialog, section "Logging".
Remote command:
2.4.18 BLER Measurement Configuration
The "Extended BLER" measurement is included in the "LTE signaling" application. To
access the measurement, press the softkey "LTE RX Meas" in the LTE signaling main
view. Then select the tab "Extended BLER". The views and configuration dialogs of the
tab are described in this section.
2.4.18.1
Measurement Control
The measurement is turned on or off using the ON | OFF or RESTART | STOP keys.
See also: "Measurement Control" in the R&S
CMW user manual, chapter "System
Overview"
Extended BLER (Softkey)
The softkey shows the current measurement state. Additional measurement substates
can be retrieved via remote control.
Remote command:
2.4.18.2
Measurement Views
The measurement provides BLER, throughput, HARQ and reported CQI results in sev-
eral views. The BLER view shows also common settings of the "LTE signaling" appli-
cation. Additional settings of the "LTE signaling" application can be accessed via the
"Signaling Parameters" softkey and the related hotkeys.
To switch to the signaling application, press the "LTE Signaling" softkey two times.
The "Config" hotkey opens either the configuration dialog of the measurement or the
configuration dialog of the signaling application, depending on which softkey is active.
The following figure shows the result overview, providing access to the individual
detailed result views.
GUI Reference
135-1095-0799