LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
103
User Manual 1173.9628.02 ─ 16
Fig. 2-40: Settings in the main view, PCC and SCC
Upper Part
The upper part contains the following settings:
●
Duplex mode
See
chapter 2.4.4, "General Settings"
●
RF frequency settings
See
chapter 2.4.6.2, "RF Frequency"
●
Cell bandwidths
See
chapter 2.4.10, "Physical Cell Setup"
●
Most important DL power parameters (RS EPRE, full cell BW power)
See
chapter 2.4.8, "Downlink Power Levels"
●
Most important UL power parameters (PCC tab only)
See
chapter 2.4.9, "Uplink Power Control"
●
Swap button (SCC tab only)
See
Swap (Button)
The "Swap" button exchanges PCC DL settings with SCC settings.
The following settings are exchanged:
●
Operating band, channel number and frequency
●
Cell bandwidth
●
Active scheduling with all related settings (RB configuration, modulation etc.)
Only the active scheduling settings for the active cell bandwidth are written to the
other carrier. The settings related to inactive scheduling types or inactive cell band-
widths are not swapped.
GUI Reference
深圳德标仪器
135-1095-0799