R&S CMW-KM5 Series, Руководство пользователя

Страница: 104 / 856

LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
104 User Manual 1173.9628.02 ─ 16
If the swap changes the PCC scheduling type or the PCC cell bandwidth, the rela-
ted inactive UL settings are activated.
Example 1
–
operating band and channel number:
●
Before swap
–
PCC: band 3, channel DL 1500 / UL 19500
– SCC: band 20, channel 6300
●
After swap
–
PCC: band 20, channel DL 6300 / UL 24300
– SCC: band 3, channel 1500
Example 2
–
cell BW, scheduling type and #RB:
●
Before swap
–
PCC: 10 MHz, RMC, DL 50 RB, UL 40 RB
– SCC: 5 MHz, user-defined channel, 22 RB
– PCC inactive settings for 5 MHz, user-defined channel: DL 15 RB, UL 18 RB
●
After swap
–
PCC: 5 MHz, user-defined channel, DL 22 RB, UL 18 RB
– SCC: 10 MHz, RMC, 50 RB
– PCC inactive settings for 10 MHz, RMC: DL 50 RB, UL 40 RB
– SCC inactive settings for 5 MHz, user-defined channel: 22 RB
If you perform a swap for an established connection, all connection states after the
swap equal the states before the swap. Either redirection or blind handover is used for
the swap, see
"Operating Band Change, Frequency Change" on page 174.
Remote command:
CONFigure:
​
LTE:
​
SIGN<i>:
​
CONNection:
​
SCC:
​
SEXecute
​
Connection Setup
Contains scheduling type-specific settings:
●
RMC:
The settings are the same as in the configuration tree, see
chapter 2.4.12.5, "RMC
Connection Settings" , on page 179
●
User-defined Channels:
The settings are the same as in the configuration tree, see
chapter 2.4.12.6, "User-
Defined Channel Configuration" , on page 182
●
User-defined TTI-Based / Fixed CQI:
You can configure the settings of a selected subframe (TTI) directly. Alternatively,
press the button "Edit All" to open a dialog box where you can edit the settings of
all subframes.
For a parameter description, see
chapter 2.4.1.7, "TTI-Based Channel Configura-
tion" , on page 105.
●
Follow WB CQI / PMI / CQI-RI / CQI-PMI-RI:
You can configure the settings of a selected uplink subframe directly. The downlink
settings apply to all subframes.
For additional settings, press the button "Edit All". It opens a dialog box where you
can edit the settings of all uplink and downlink subframes.
For a parameter description, see
chapter 2.4.1.7, "TTI-Based Channel Configura-
tion" , on page 105.
●
SPS:
See
chapter 2.4.1.8, "SPS Configuration" , on page 110
GUI Reference
深圳德标仪器
135-1095-0799