LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
182
User Manual 1173.9628.02 ─ 16
2.4.12.6
User-Defined Channel Configuration
The parameters in this section configure the resource block configuration, modulation
type and transport block size for DL and UL channels. The allowed combinations are
more flexible than for 3GPP compliant RMCs. Option R&S CMW-KS510 is required.
The settings apply if
= "User-Defined Channels".
To configure the channels, proceed as follows (for UL and DL):
1. Select the cell bandwidth (see
chapter 2.4.10, "Physical Cell Setup"
2. Select the number of allocated Resource Blocks (RB), the position of the first RB
and the modulation type.
3. Select the transport block size index.
For valid parameter combinations and background information see
The channel settings can be changed in all main connection states including "Connec-
tion Established".
For carrier aggregation scenarios, you can configure different downlink settings for
PCC and SCC.
Fig. 2-79: User-defined channel settings
................................................................................................ 182
# Resource Blocks ... Transport Block Size
................................................................ 183
Use Stream 1 Settings
This parameter is visible if the selected transmission scheme involves several downlink
streams.
If you enable this parameter, all stream 1 settings are also applied to stream 2.
GUI Reference
深圳德标仪器
135-1095-0799