LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
438
User Manual 1173.9628.02 ─ 16
SENSe:LTE:SIGN<i>:CONNection[:PCC]:FCPRi:DL:MCSTable:DETermined?
SENSe:LTE:SIGN<i>:CONNection:SCC:FCPRi:DL:MCSTable:DETermined?
Queries the automatically determined mapping table for PCC or SCC. The table is
used for scheduling type "Follow WB CQI-PMI-RI", if the table mode is set to
DETermined
.
Return values:
<MCS>
Comma separated list of 15 MCS values, for reported CQI index
value 1 to 15
Range:
0 to 31
Usage:
Query only
Firmware/Software:
V3.2.80
Options:
R&S CMW-KS510/-KS512 (without CA/with CA)
R&S CMW-KS502/-KS552 (FDD/TDD) for SCC
Manual operation:
See
2.6.14.14
SPS Settings
The following commands define parameters for the scheduling type "SPS".
CONFigure:LTE:SIGN<i>:CONNection[:PCC]:SPS:TIConfig
...............................................438
CONFigure:LTE:SIGN<i>:CONNection[:PCC]:SPS:SINTerval
............................................ 438
CONFigure:LTE:SIGN<i>:CONNection[:PCC]:SPS:DL
.......................................................439
CONFigure:LTE:SIGN<i>:CONNection[:PCC]:SPS:UL
.......................................................439
SENSe:LTE:SIGN<i>:CONNection[:PCC]:SPS:DL<Stream>:CRATe:ALL?
.......................... 440
SENSe:LTE:SIGN<i>:CONNection[:PCC]:SPS:UL:CRATe:ALL?
........................................ 440
CONFigure:LTE:SIGN<i>:CONNection[:PCC]:SPS:TIConfig
<Enable>
Configures the parameter "twoIntervalsConfig", signaled to the UE for scheduling type
SPS in TDD mode.
Parameters:
<Enable>
OFF | ON
*RST:
OFF
Example:
See
Firmware/Software:
V3.2.80
Options:
R&S CMW-KS510
Manual operation:
See
CONFigure:LTE:SIGN<i>:CONNection[:PCC]:SPS:SINTerval
<Interval>
Configures the subframe periodicity n for scheduling type SPS. The UE is granted the
configured RB allocation in every n
th
subframe.
Command Reference