LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
648
User Manual 1173.9628.02 ─ 16
<Band2>
100,150,200
Second channel bandwidth in 0.1 MHz
For <Band1> = 150, only <Band2> = 150 is allowed
For <Band1> = 200, all <Band2> values are allowed
Parameters:
<OBWlimit>
Range:
0 MHz to 40 MHz
*RST:
Depends on the channel bandwidths
Default unit: Hz
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
Example:
See
Firmware/Software:
V3.2.70
Options:
R&S CMW-KM502/-KM552 for FDD/TDD
CONFigure:LTE:MEAS<i>:MEValuation:LIMit:SEMask:OBWLimit:CAGGregation:
OCOMbination
<OBWlimit>
Defines an upper limit for the occupied bandwidth.
The settings apply to all channel bandwidth combinations that are not supported by
.
Parameters:
<OBWlimit>
Range:
0 MHz to 40 MHz
*RST:
0 MHz
Default unit: Hz
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
Example:
See
Firmware/Software:
V3.2.70
Options:
R&S CMW-KM502/-KM552 for FDD/TDD
CONFigure:LTE:MEAS<i>:MEValuation:LIMit:SEMask:LIMit<no>:CAGGregation:
CBANdwidth<Band1>:CBANdwidth<Band2>
<Enable>, <FrequencyStart>,
<FrequencyEnd>, <Level>, <RBW>
Defines general requirements for the emission mask area <no>. The activation state,
the area borders, an upper limit and the resolution bandwidth must be specified.
The settings are defined separately for each channel bandwidth combination of the
aggregated channels.
Suffix:
<no>
.
1..12
Number of the emission mask area
Command Reference
深圳德标仪器
135-1095-0799