LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
651
User Manual 1173.9628.02 ─ 16
The settings are defined separately for each channel bandwidth combination of the
aggregated channels.
Suffix:
<no>
.
1..12
Number of emission mask area
<Band1>
150,200
First channel bandwidth in 0.1 MHz
<Band2>
100,150,200
Second channel bandwidth in 0.1 MHz
For <Band1> = 150, only <Band2> = 150 is allowed
For <Band1> = 200, all <Band2> values are allowed
<Table>
1
Set of additional requirements
1 = CA_NS_04
Parameters:
<Enable>
OFF | ON
OFF
: disables the check of these requirements
ON
: enables the check of these requirements
*RST:
ON (<no> = 1 to 3) / OFF (<no> = 4 to 12)
<FrequencyStart>
Start frequency of the area, relative to the edges of the aggrega-
ted channel bandwidth
Range:
0 MHz to 45 MHz
*RST:
depends on the suffixes
Default unit: Hz
<FrequencyEnd>
Stop frequency of the area, relative to the edges of the aggrega-
ted channel bandwidth
Range:
0 MHz to 45 MHz
*RST:
depends on the suffixes
Default unit: Hz
<Level>
Upper limit for the area
Range:
-256 dBm to 256 dBm
*RST:
depends on the suffixes
Default unit: dBm
<RBW>
K030 | K100 | M1
Resolution bandwidth to be used for the area
K030
: 30 kHz
K100
: 100 kHz
M1
: 1 MHz
*RST:
K030 (<no> = 1) / M1 (<no> = 2 to 12)
Example:
See
Firmware/Software:
V3.2.70
V3.2.80: <no> of areas enhanced to 12
Command Reference
深圳德标仪器
135-1095-0799