manualshive.com logo in svg

R&S CMW-KM5 Series, Руководство пользователя

Поделиться
Скачать
R&S CMW-KM5 Series Скачать руководство пользователя страница 174

LTE Signaling

R&S

®

CMW-KM5xx/-KS5xx

174

User Manual 1173.9628.02 ─ 16

For carrier aggregation scenarios, the PDCCH configuration may be different for PCC
and SCC.

Remote command: 

CONFigure:

​

LTE:

​

SIGN<i>:

​

CONNection[:

​

PCC]:

​

PDCCh:

​

RPDCch

​

SENSe:

​

LTE:

​

SIGN<i>:

​

CONNection[:

​

PCC]:

​

PDCCh:

​

PSYMbols?

​

SENSe:

​

LTE:

​

SIGN<i>:

​

CONNection[:

​

PCC]:

​

PDCCh:

​

ALEVel?

​

CONFigure:

​

LTE:

​

SIGN<i>:

​

CONNection:

​

SCC:

​

PDCCh:

​

RPDCch

​

SENSe:

​

LTE:

​

SIGN<i>:

​

CONNection:

​

SCC:

​

PDCCh:

​

PSYMbols?

​

SENSe:

​

LTE:

​

SIGN<i>:

​

CONNection:

​

SCC:

​

PDCCh:

​

ALEVel?

​

Operating Band Change, Frequency Change

Select the mechanism to be used for inter-band handover and inter-frequency hand-
over within the LTE signaling application.

Either blind handover or redirection can be used, see 

chapter 2.2.9, "Handover"

,

on page 28.

The selected mechanism is also relevant for a swap of SCC and PCC settings during
an established connection. If the cell bandwidth is changed by the swap, redirection is
used. If the cell bandwidth is not changed but the band is changed, the setting "Operat-
ing Band Change" is used. If also the band is not changed but the frequency is
changed, the setting "Frequency Change" is used.

Remote command: 

CONFigure:

​

LTE:

​

SIGN<i>:

​

CONNection:

​

OBCHange

​

CONFigure:

​

LTE:

​

SIGN<i>:

​

CONNection:

​

FCHange

​

CS Fallback (MO)

The following settings configure the feature Circuit Switched Fallback (CSFB) for
mobile originating calls.

A fallback for a mobile originating voice call can be performed to a WCDMA cell or to a
GSM cell. In both cases, specify the target band and channel. For GSM, you can addi-
tionally set the band indicator for distinction of GSM 1800 and GSM 1900 bands.

Option R&S CMW-KS510 is required.

Remote command: 

CONFigure:

​

LTE:

​

SIGN<i>:

​

CONNection:

​

CSFB:

​

DESTination

​

CONFigure:

​

LTE:

​

SIGN<i>:

​

CONNection:

​

CSFB:

​

GSM

​

CONFigure:

​

LTE:

​

SIGN<i>:

​

CONNection:

​

CSFB:

​

WCDMa

​

Accept Multiple Default Bearer

Enables/disables accepting multiple default bearer requests.

●

Disabled: Only the first default bearer request of a UE is accepted. Additional
requests are rejected.

●

Enabled: If the UE sends several default bearer requests, several bearers are
established. For each bearer a different IP address is assigned to the UE.

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание CMW-KM5 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды